Flexible Hose

A clear flexible (90°Shore A) polyether polyurethane hose reinforced with a 1000 denier polyester high tenacity yarn. The raw materials are acceptable under FDA regulations for food use.

 

 

Un-reinforced PVC tubing is manufactured from an FDA approved grade of material. A highly flexible PVC tubing supplied in a standard clear with a range of colours and translucent tints also available. Conforms to DIN 16940.

Un-reinforced silicone tubing, with bore sizes from 0.2mm ID up to 200mm, meets the demands of practically any application.

A Blue flexible PVC-Nitrile blend hose reinforced with a white rigid PVC spiral. The hose has a smooth bore for minimum friction and maximum flow.

Thor Brewers Delivery – WP 10 bar 150 PSI

Flexi-coil airline coils are manufactured from seamless nylon (PA) which is then pre-coiled. Each airline is supplied complete with factory fitted 360° swivel male couplings and spring guards each end.

UHMWPE CHEMICAL S/D FOOD QUALITY W.P.10 BAR – 150 psi Made In Italy

VendHose is a PVC-free WRAS approved hose.

Super-heated Steam Hose manufactured to BS 5342 Type 2A

A silver/grey flexible PVC reinforced with a white rigid PVC spiral. The hose has a smooth bore for minimum friction and maximum flow.

Braided Reinforced PVC Hose is constructed using a flexible 100% PVC tube liner which is reinforced with a 1000 denier polyester high tenacity yarn and then covered with an outer layer of flexible PVC. The ingredients of Braid Reinforced PVC Hose are approved for food contact applications.

Available in Galvanised Steel and Type 304 Stainless Steel to BS1449 (Type 316 upon request) Interlock is manufactured by winding a profiled metal strip into a tube with the edges being completely interfolded. This fully interlocked section is packed with a copper wire (cotton or rubber packing available as a special).

Available in Galvanised Steel and Type 304 Stainless Steel (Type 316 upon request) Griplock is manufactured by winding a profiled strip into a tube with an overlapping section.

A clear flexible (90°Shore A) un-reinforced polyether polyurethane tubing. The raw materials are acceptable under FDA regulations for food use.

Oil suction and delivery hose

Clear PVC Non-toxic hose reinforced with a steel wire helix. A very flexible hose capable of a tight bend radius with a completely smooth inner and outer for optimized flow characteristics.

Braid reinforced silicone hose is manufactured in sizes ranging from 3mm bore up to 50mm bore in a variety of silicone materials. Predominantly braided with polyester yarn, monofil or glass, special braidings such as Aramid are used for outstanding burst pressures.

A translucent green flexible PVC hose reinforced with a rigid PVC spiral. The hose has a smooth bore for minimum friction and maximum flow. Also available in Black flexible PVC material.

Manufactured in LDPE (Low Density), MDPE (Medium Density) & HDPE (High Density) Polyethylene tubing is durable, flexible and lightweight making it suitable for a wide number of applications.

An olive green flexible PVC hose reinforced with a white rigid PVC spiral. The hose has a smooth bore for minimum friction and maximum flow.

Manufactured from Flexible Grade Nylon material, Nylon tubing is a lightweight and flexible tubing available in a range of colours in both metric & imperial sizes. Select diameters can be manufactured to DIN 73378 subject to minimum order quantities.

NOVA is a high quality fire hose for use by Professional Fire Fighters in the most demanding situations.

Manufactured from 100% polyester polyurethane, Pneumatic grade polyurethane tubing is a lightweight and very flexible tubing which is available in a range of colours.

Standard duty shotblast hose – manufactured to BS5121.

A clear flexible PVC hose reinforced with a white rigid PVC spiral. The hose has a smooth bore for minimum friction and maximum flow. All ingredients are approved for use with food stuffs.

Heavy duty water suction and delivery hose – manufactured to BS1102: 1977 (1983).

Flexible PVC Layflat hose with a closely woven yarn reinforcement inseparably fused between the inner and outer walls.

Medium Wall Polyurethane ducting reinforced with a anti-shock rigid PVC helix. Corrugated outer with a perfectly smooth bore for optimised flow characteristics. Wall thickness from 0.8mm to 1.0mm.

Un-reinforced Peristaltic Pump Grade silicone tubing, with bore sizes from 0.5mm id up to 25mm id.

The multilayer design, made of an exclusive woven fibre and a double core layer, ensures that Tricoflex is highly flexible for easy handling, with excellent resistance to repeated bending, crushing and pulling as well as minor deformation under pressure.

P.T.F.E. (Polytetrafluroethylene) tubing is one of the most versatile engineering materials available and is recognised for its flexibility, even at very low temperatures. It is almost universally inert to industrial chemicals and solvents and can handle virtually any corrosive material in use today. There is low permeability of the tube contents.

Swan Tube is constructed of a rigid grey PVC strip profile which is spirally wound to produce a robust flexible duct. Supplied in standard 5 metre lengths.

Light Wall Polyurethane ducting reinforced with a anti-shock rigid PVC helix. Corrugated outer with a perfectly smooth bore for optimised flow characteristics. Wall thickness from 0.4mm to 0.8mm.

Suitable for most applications including food process, steam, chemical, gas and high temperature installations.

DH BS EN ISO 2398 + BS5118/2 – 20 Bar – size – year of mfr.